Another solution is using the "Affix silence" component (foo_dsp_silence). Despite its name you can use it to prefix silence. After installing it,...
Not clipping unless you hear distortion, likely just tripping the DC offset detection.
My Ragnarok 2 reliably goes into protection with a particular song because it has a DC offset at a particular point. The woofer movement made that...
Edit: redundant, feel free to delete. No. The Mojo doesn't have analog inputs. Inputs: 1x Micro USB 768kHz/32-bit Capable Input 1x 3.5mm Jack...
You'll need at least a power amp, which you could connect to the headphone out (be careful with volume management), or an integrated amp / preamp...
This might be a disqualifying statement, but when I recently compared them it was very hard to hear a difference after using Wireworld OCC...
Turns out the issue I had with USB Audio Player PRO and Unison USB (no sound after a sample rate change) can be fixed by enabling the "Free USB...
*eats ice cream for breakfast harder*
Great, thank you for confirming. Agreed. Ah, so would you say your experience that some iFi products force the MQA filter is limited to the 5.3c...
Very interesting, thanks for that! I did play some white noise at 44.1 kHz using foobar2000 and ASIO into the iFi ZEN DAC Signature V1 (not the V2...
Huh, interesting. I would have expected the filter to only be forced when MQA is actually sent. Otherwise it should behave like a regular PCM DAC....
Capacitors? Not uncommon with power bricks.
For the ZEN DAC Signature V1, one of the three firmware versions listed for download (after entering a serial number) is 5.2, which doesn't...
The DAC produces a line level signal within the normal voltage range for a line level signal. In the active modes, the extra gain might simply...
Separate names with a comma.