Custom Turntable Isolation Platform Questions

Discussion in 'Vinyl Nutjob World: Turntable and Related Gear' started by Lou Casadonte, Mar 31, 2018.

  1. Lou Casadonte

    Lou Casadonte Friend

    Pyrate
    Joined:
    Jul 2, 2017
    Likes Received:
    199
    Trophy Points:
    43
    Location:
    usa
    I'd like some input from the group. the first pic is an idea of the finished product look, the second pic is a mockup close to size and the third pic is the cherry wood frame setup for the platform. A friend who is fantastic with resins is building this for me. We are going to put LED's in the resin and I wanted the platform itself on isolation feet. That is my current question. Recommendations for feet for the platform. If the platform sits up a bit, it will create a glow below the platform from the led's. Thoughts?


    [​IMG]

    [​IMG]
    [​IMG]
     
  2. Wfojas

    Wfojas Friend

    Pyrate
    Joined:
    Sep 27, 2015
    Likes Received:
    848
    Trophy Points:
    93
    Location:
    CA
    How did this end up ? Curios as to how it souinds, mostly, though it is great eye candy.
     
  3. Lou Casadonte

    Lou Casadonte Friend

    Pyrate
    Joined:
    Jul 2, 2017
    Likes Received:
    199
    Trophy Points:
    43
    Location:
    usa
    The wood wasn't cured and the resin developed some bubbles so it is being remade with sealed wood right now. Hopefully be done in a week or two.
     

Share This Page