I thought the same, so I guess an easy "fix" would be adding couple of MKP caps (big enough, to not affect low end roll-off) between OPA1612 and...
False assertion. Take of the drivers from your wood speakers and see if the sound gets modified. The T60 RP has a bigger and faster bass, although...
Same drivers as the T50RP mk3 indeed, but the thin wooden cups sound is better that thin plastic cups sound. I did liked the sound more on T60,...
I know we're off-topic here, but my Solo Gen3 has 2V RMS @2 o'clock and 4V RMS @5 o'clock on balanced TRS plugs, while max. output is at 5.5...
What is this mod about, please? Any pics and instructions so I can do myself such a mod? Thank you!
The metallic ring is, most likely, caused by the post-ringing caused by the output stage, especially if using thin & longer headphones cables....
Swapping the default JRC5534DD with SS V6 Classic/Vivid will make it an opampless amplifier. However, I couldn't actually measure any differences...
I was able to get over 10V RMS @600 Ohms (clipping starts after 10.35V RMS). [IMG] On 30 Ohms resistive load it's steady around 2W/channel,...
Just got mine, it rattles on both drivers if bass goes beyond 90dB SPL. :( Head-Fi has several people with same story, one of them even replaced...
I tried this one couple of hours before and I was able to hear the square-wave only, but not the sine-wave; instead, it was like a pause between...
Crosstalk and channel imbalance, but also phase delay might help here.
I see your point, let's find couple of devices measuring similar in regard only with the below: - 2nd and 3rd harmonics - mains freq and it's 2nd...
Continuing...
Why don't you jump in? You have the right to go there and vote, so get there and say your opinion, it could be fun. :) HF is based a lot on...
SS states from Solid-State, this is not an opamp, there're 2 small PCBs inside with SMD components: apparently perfectly matched transistors and...
Separate names with a comma.