FF: cables to chop up for DIY purposes

I ordered some cables from redco recently and in an uncharacteristic slip-up the ones they send had the wrong gender connectors. They immediately sent the correct ones, and so now I have some useless cables to give away to someone who wants them as grist to their DIY cabling mill. They are:

9pin DSUB -> 10ft Mogami 3080 -> Neutrik XX-EMC female
26pin DSUB -> 10ft Mogami 3080 -> Neutrik XX-EMC female

The 9pin DSUB is wired for the AES out of an RME9632. The 26pin DSUB is wired for the first AES channel of an AES16. As I mentioned, the cables at the other end have the wrong gender XLR connector. If you replace the XLR you could have an AES cable for one of these cards. If you replace the DSUBs you can have a pair of XLR interconnects. Or you could take everything apart and make a Gordian knot or a fancy necklace, I don't know.

First Friend to message me gets them. I will aim to send late this week/early next.

 

Both cables are GAWN. @shipsupt this can now be closed. Thanks!