Comments on Profile Post by ckhirnigs

  1. Thad E Ginathom
    Thad E Ginathom
    Tube damper sir? I do believe that what you need is the *slight tapper.*
    Aug 8, 2022
    ckhirnigs likes this.
  2. ckhirnigs
    ckhirnigs
    I switched the tube from the right channel to the left and haven't had an issue since. I'll have my "slight tapper" at the ready though.
    Aug 8, 2022
    Thad E Ginathom likes this.
  3. Azimuth
    Azimuth
    That might be the pins. Might need to clean and restraighten. And then retention the socket.
    Aug 8, 2022
    ckhirnigs likes this.
  4. ckhirnigs
    ckhirnigs
    @Azimuth I cleaned the pins with Deoxit before installing them the first time. I'll check for slightly bent pins if I have any more issues. Thanks for the tips.
    Aug 8, 2022
  5. Azimuth
    Azimuth
    It might be from your tube socket then to tighten up those pins. Just bend them from the sides to the middle.
    Aug 8, 2022
    ckhirnigs likes this.