1.     Don't be a dotard!
    Read these "rules" AND introduce
    yourself     before your first post
  2. A healthy approach to understanding measurements
    Being true to what the artists intended
  3. After being asked for the 308th time, Merv lists top 5 headphones
    (opinion / entertainment piece)
    Dismiss Notice
  4. $1000 to the first to design a headamp using discrete components with better measurements than Magni 3+
    Dismiss Notice
IMPORTANT: New Members Read This Don't Be a Measurement Fascist Merv's Top 5 Headphones - 2023 Edition $1000 Challenge

Comments on Profile Post by Raimei Templar

  1. joch
    joch
    Not that I noticed, but then I don't listen too long. Does it happen around the same time? It could be from something in your building or area.
    Feb 5, 2023
    Raimei Templar likes this.
  2. Raimei Templar
    Raimei Templar
    It is usually in the morning so I also wondered if it was something with the power. Piety might just be worse than the Jot2 and Archel at rejecting noise from power I guess.
    Feb 5, 2023
  3. Lyander
    Lyander
    I never have, but I do have mine plugged into a power strip/surge protector so that's likely helping matters. Perhaps also compromising performance but that's not a level of nervosa I'm going to entertain
    Feb 5, 2023
  4. Azimuth
    Azimuth
    Next time it happens, unplug the input from the back of the Piety to see if it is coming from internal to the Piety or external. If it happens when first turning on, it could be the regulators settling. Also check how much incoming power you have coming in from your power outlet.
    Feb 6, 2023
    joch likes this.
  5. M3NTAL
    M3NTAL
    Nothing yet - I think deoxit gold also cleaned the pot static up. I'll switch from Vali 2++ to Piety tonight.
    Feb 6, 2023