1.     Don't be a dotard!
    Read these "rules" AND introduce
    yourself     before your first post
  2. A healthy approach to understanding measurements
    Being true to what the artists intended
  3. After being asked for the 308th time, Merv lists top 5 headphones
    (opinion / entertainment piece)
    Dismiss Notice
  4. $1000 to the first to design a headamp using discrete components with better measurements than Magni 3+
    Dismiss Notice
IMPORTANT: New Members Read This Don't Be a Measurement Fascist Merv's Top 5 Headphones - 2023 Edition $1000 Challenge

Comments on Profile Post by Ksorota

  1. Ksorota
    Ksorota
    Gungnir/Freya N/ Vali 1/Vali 1
    Sep 6, 2023
  2. Gazny
    Gazny
    Gungnir is my guess
    Sep 6, 2023
  3. RestoredSparda
    RestoredSparda
    Freya for sure
    Sep 6, 2023
  4. Ksorota
    Ksorota
    Freya N cooking at 130 surface temp
    Gungnir about 120
    And Vali about 112

    Most surprised about the gungnir
    Sep 6, 2023
    Qildail and Claritas like this.
  5. HotRatSalad
    HotRatSalad
    They must be stacked right ? Freya and Gungnir Multibit ?
    Sep 6, 2023
    Claritas likes this.
  6. Ksorota
    Ksorota
    That’s right, stacked. Might have to change that!

    Did early gungnirs have open vent holes in top?
    Sep 6, 2023
  7. HotRatSalad
    HotRatSalad
    Not sure my A2 doesn't though.
    Sep 6, 2023
  8. caute
    caute
    my gungy was def noticeably hotter on one side than the other
    Sep 7, 2023
  9. rott
    rott
    My A1 has vent holes.
    Sep 7, 2023
  10. Ksorota
    Ksorota
    @rott So you can see into the circuit board? I heard that some old D/S versions were open to the boards inside and that were closed up with the MB upgrade. I have never seen it though
    Sep 7, 2023
  11. rott
    rott
    @Ksorota you're right - my A1 MB does have an internal covering that prevents actually seeing the internals through the vent holes on top.
    Sep 8, 2023
    Ksorota likes this.